TRIPP LITE power inverter APS750 750w 2-outlet 12v NEW

TRIPP LITE power inverter APS750 750w 2-outlet 12v NEW

TRIPP LITE power inverter APS750 750w 2-outlet 12v NEW

TRIPP LITE power inverter APS750 750w 2-outlet 12vdc-120vac (APS750) (New-Retail). Tripp Lite's APS750 3-function DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 750 watts of continuous 120V AC power to 2 AC outlets from any 12V battery or automotive DC source. When AC cable is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 20 amp charging system. Supplies up to 960 watts of continuous 120V AC bypass power.

In UPS mode, the APS system responds to blackouts and brownouts with an uninterrupted transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling). Reliable transformer design, with efficient PWM sine wave output and frequency control, powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup.

Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery power transfer voltages. Compare the "Continuous" and "Peak Surge" wattage ratings, and you'll find PowerVerter Plus Inverters supply up to double their output to easily handle equipment start up and motor cycling requirements. A DoubleBoost feature provides up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold start heavy-duty tools and equipment. An OverPower feature delivers up to 150% of the continuous output for up to 1 hour.

12V DC input; 120V AC output; 2 outlets. 750 watts continuous output (960 watts bypass output). 1500 watts peak output for an extended period. Fast load switching with millisecond transfer time.

Output watt capacity (watts): Continuous (Inverting) - 750 watts, Overpower (up to 1 hour) - 1125 watts, Double-Boost wattage (up to 10 seconds) - 1500 watts; Continuous (Pass Through) - 960 watts (limited only by facility/vehicle circuit board). Output nominal voltage: AC OUTPUT: 120V AC nominal, DC CHARGER. OUTPUT (DC): 12V DC nominal. Output voltage regulation: LINE POWER (AC): Maintains 120V nominal sine wave output.

INVERTER POWER (AC): Maintains PWM sine wave output voltage of 120 V AC (+/-5%). DC CHARGER OUTPUT (See battery recharge rate section).

Output frequency regulation: 60 Hz (+/- 0.3 Hz). Outlet quantity / type: Includes 2 AC outlets (NEMA 5-15R). Overload protection: Includes 6A input breaker dedicated to the charging system and 8A output breaker for AC output loads. Aximum input amps / watts: DC INPUT: Full continuous load - 72A at 12V DC.

AC INPUT: 8 amps at 120VAC with full inverter and charger load. Input connection type: DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: NEMA 5-15P input plug.

Input cord length: DC INPUT: User supplies cabling. 6 gauge or larger recommended. AC INPUT: attached 6 ft. AC line cord with plug. Recommended electrical service: DC INPUT: Requires 12V DC input source capable of delivering 72A for the required duration (when used at full continuous capacity).

DC system voltage: DC input operating range 10-15V DC. Battery recharge rate: Includes 20 amp DC charging system with selectable profiles for vented wet cell and sealed gel cell batteries (see manual for detailed charger information). Expandable battery runtime: Runtime is expandable with any number of user supplied wet or gel type batteries.

Front panel LEDs: Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). Switches: 3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode, "auto/remote" setting enables automatic transfer from line power to battery power - to maintain continuous AC power to connected loads.

AC surge suppression: AC surge suppression not included. We strive to provide the best possible shopping experience. We strive to satisfied 100% of our customers.

The item "TRIPP LITE power inverter APS750 750w 2-outlet 12v NEW" is in sale since Tuesday, May 31, 2016. This item is in the category "Computers/Tablets & Networking\Laptop & Desktop Accessories\Other Laptop & Desktop Accs". The seller is "styletechgroup" and is located in california. This item can be shipped worldwide.


TRIPP LITE power inverter APS750 750w 2-outlet 12v NEW


Index    Sitemap    Contact    Privacy Policies    Terms of Use