Tripp Lite SmartPro 120V 3kVA 2.25kW Line Interactive Sine Wave UPS 2U USB DB9

Tripp Lite SmartPro 120V 3kVA 2.25kW Line Interactive Sine Wave UPS 2U USB DB9
Tripp Lite SmartPro 120V 3kVA 2.25kW Line Interactive Sine Wave UPS 2U USB DB9
Tripp Lite SmartPro 120V 3kVA 2.25kW Line Interactive Sine Wave UPS 2U USB DB9
Tripp Lite SmartPro 120V 3kVA 2.25kW Line Interactive Sine Wave UPS 2U USB DB9

Tripp Lite SmartPro 120V 3kVA 2.25kW Line Interactive Sine Wave UPS 2U USB DB9

New, factory sealed inside open box. Mint, in original retail box ready for first time use. Opened box to confirm factory sealed items. Pictures are of the item you will receive. Tripp Lite SmartPro 120V 3kVA 2.25kW Line Interactive Sine Wave UPS 2U Rack/Tower.

3kVA / 3000VA / 2250W line interactive 2U rack/tower UPS, Sine Wave. Extended runtime options up to 1600W, Interactive LCD interface, 4 post mounting kit. USB, RS232, EPO and pre-installed WEBCARDLX Network Interface.

120V NEMA L5-30P input and 8 NEMA 5-15/20R & 1 L5-30R outlets. Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 98% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB port, DB9 serial port and pre-installed WEBCARDLX network management interface card.

Output Volt Amp Capacity (VA). Nominal Output Voltage(s) Supported.

120v nominal output in battery mode. Output Voltage Regulation (Line Mode). Output Voltage Regulation (Battery Mode).

Two switchable single-outlet load banks. Two 20A output breakers protect 4 5-15/20R outlets each. Output AC Waveform (AC Mode). Output AC Waveform (Battery Mode).

Rated input current (Maximum Load). Nominal Input Voltage(s) Supported. UPS Input Cord Length ft. Output with external battery pack configurations is limited to 1600 watts maximum. Battery Recharge Rate (Included Batteries). Less than 4.5 hours from 10% to 90%.

Internal UPS Replacement Battery Cartridge. Front panel battery access door. Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145. Input voltages between 127 and 145 are reduced by 12%.

Input voltages between 108 and 96 are boosted by 12%. Input voltages between 83 and 95 are boosted by 24%. USER INTERFACE, ALERTS & CONTROLS. Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed LCD configuration and monitoring options). 3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions.

Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available. Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions.

UPS AC Suppression Response Time. EMI / RFI AC Noise Suppression. 4 post rackmount installation accessories included.

Installation Form Factors Supported with Optional Accessories. 2 post rackmount (2POSTRMKITWM); Wallmount (2POSTRMKITWM); Tower (2-9USTAND); 2-4 post front rail rackmount (UPSHDEARKIT). UPS Power Module Dimensions hwd, in.

3.43 x 17.32 x 19.46. Minimum Required Rack Depth without External Battery Pack (cm).

Minimum Required Rack Depth with External Battery Pack (cm). Minimum Required Rack Depth without External Battery Pack in. Minimum Required Rack Depth with External Battery Pack in. UPS Power Module Weight lbs. UPS Power Module Weight (kg).

10.100 x 25.200 x 27.500. +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius. +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius.

AC Mode BTU / Hr. Battery Mode BTU / Hr. 0-3000m / 0-10,000 ft. DB9 Serial; EPO (emergency power off); Pre-installed network card; Slot for SNMP/Web interface; USB (HID enabled). Includes pre-installed WEBCARDLX Network Management Card interface.

USB and DB9 cabling included. Supports Watchdog application, OS and hard-reboot restart options for remote applications. 5 milliseconds (AC to battery); 1 millisecond (battery to AC). Low Voltage Transfer to Battery Power (Setpoint).

High Voltage Transfer to Battery Power (Setpoint). Includes back panel grounding lug. Cold Start (Startup in Battery Mode During a Power Failure).

Greater than 95% efficiency - GREEN UPS; Individually controllable load banks. Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI); ROHS (Restriction of Hazardous Substances); ENERGY STAR Qualified.

The item "Tripp Lite SmartPro 120V 3kVA 2.25kW Line Interactive Sine Wave UPS 2U USB DB9" is in sale since Saturday, July 28, 2018. This item is in the category "Computers/Tablets & Networking\Power Protection, Distribution\Uninterruptible Power Supplies". The seller is "gearbrokers" and is located in Kansas City, Missouri. This item can be shipped to United States, Canada, Bahamas, Viet nam.


Tripp Lite SmartPro 120V 3kVA 2.25kW Line Interactive Sine Wave UPS 2U USB DB9


Index    Sitemap    Contact    Privacy Policies    Terms of Use