Tripp Lite SNMP webcard UPS Remote Monitoring and control

Tripp Lite SNMP webcard UPS Remote Monitoring and control
Tripp Lite SNMP webcard UPS Remote Monitoring and control

Tripp Lite SNMP webcard UPS Remote Monitoring and control

Internal SNMP/Web management accessory card with simple installation and setup. Provides a variety of advanced network management tools. 10/100 Mbps auto-sensing allows optimal communication compatibility with your current 10/100 Base-T network. Supports multiple protocols Tripp Lite's Power Alert Network Management System. Tripp Lite's SNMPWEBCARD allows network users to operate any expansion slot-equipped Tripp Lite SmartPro or SmartOnline UPS as a managed device on the network.

This unit provides remote viewing of site electrical data, UPS status information and self-test logs. It also supports selective rebooting of locked network equipment without disrupting power to other devices when used with customized load management receptacles available on select Tripp Lite UPS systems. Tripp Lite's SNMPWEBCARD gives IT managers better visibility and control in high-density network environments. It enables any expansion slot-equipped Tripp Lite SmartPro® or SmartOnline UPS System to be operated as a managed device on the network.

The SNMPWEBCARD can provide remote viewing of site electrical data, UPS status information and self-test logs. When used with Tripp Lite UPS systems equipped with load management receptacles, it can remotely reboot locked-up network devices without interrupting power to other critical loads. An optional ENVIROSENSE accessory module provides remote temperature/humidity monitoring and a dry contact interface to control and monitor alarm, security and telecom devices. Enhanced UPS Management and Control. This enables IT managers to remotely monitor current site electrical data, UPS self-test and alert logs, as well as logged power events such as blackouts, brownouts, overvoltages, and other electrical problems.

When used with the customized load management receptacles available on select Tripp Lite UPS systems, the SNMPWEBCARD also support selective rebooting of locked-up network equipment without disrupting power to other mission-critical loads. Multiple user support allows viewing by a number of users simultaneously. Full Telnet access enables the UPS system to be remotely monitored and managed via a TELNET session. The SNMPWEBCARD can shut down remote operating systems via the network (supported operating systems must have Tripp Lite's Power Alert 12 installed).

The SNMPWEBCARD provides real-time clock support to maintain the time of day and date even if the UPS is shut down. NTP (Network Time Protocol) support enables the card to receive automatic updates to its real-time clock from a NTP server. The SNMPWEBCARD supports multiple protocols supported including HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP.

With 10/100 Mbps auto-sensing, the SNMPWEBCARD assures allows optimal communication compatibility with a current 10/100 Base-T network. DHCP/Manual configuration support enables network settings to be assigned to the card automatically or assigned manually via permanent IP addresses. Expansion slot-equipped Tripp Lite SmartPro/SmartOnline UPS Systems. Tripp Lite PowerAlert 12 (for remote operating system shutdown).

HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP. 2 x amber/green fault/active, 100 MBIT per sec. 0.71 x 5.28 x 2.36 in. The item "Tripp Lite SNMP webcard UPS Remote Monitoring and control" is in sale since Wednesday, August 19, 2015.

This item is in the category "Computers/Tablets & Networking\Power Protection, Distribution\Uninterruptible Power Supplies". The seller is "sherryberry2018" and is located in Harrison, New Jersey. This item can be shipped worldwide.


Tripp Lite SNMP webcard UPS Remote Monitoring and control


Index    Sitemap    Contact    Privacy Policies    Terms of Use